In an era marked by the relentless progression of climate change, the pursuit of innovative solutions has led to the exploration of geoengineering technologies once deemed the province of science fiction. These ambitious endeavors, ranging from infusing clouds with sulfur dioxide to mitigate solar radiation, to the development of direct air-capture plants capable of removing carbon dioxide from the atmosphere, signify a pivotal shift in our approach to environmental preservation.

With last year recorded as the hottest in modern history, the escalation of natural disasters and the warming of oceans have underscored the pressing need for immediate and impactful action. In this context, the initiatives spearheaded by both new startups and established players in the fossil fuel industry highlight a complex landscape of innovation, ambition, and controversy.

The project undertaken by Occidental Petroleum in Odessa, Texas, exemplifies the potential and challenges inherent in direct air-capture technology. By sequestering carbon dioxide underground, this facility represents a significant step towards reducing atmospheric CO2. However, its dual role in facilitating further oil extraction raises questions about the long-term benefits of such technologies.

Contrastingly, Climeworks’ facility in Iceland presents a model focused solely on the reduction of greenhouse gases, without the complicating factor of contributing to fossil fuel production. This distinction underscores the diverse strategies emerging within the field of geoengineering, each with its own set of ethical, environmental, and economic implications.

The exploration of alternative geoengineering methods, including the release of sulfur dioxide into the atmosphere and the induction of phytoplankton blooms, further illustrates the innovative yet controversial nature of these interventions. While the potential to significantly impact global climate patterns is evident, the absence of comprehensive regulatory frameworks and international standards presents a formidable challenge to the responsible implementation of such technologies.

As we venture into this new frontier, the insights from David Gelles’ article in The New York Times offer a critical perspective on the evolving landscape of climate technology. With the market for geoengineering solutions projected to experience exponential growth, the dialogue surrounding these technologies is increasingly relevant to policymakers, scientists, and the global community at large.

In navigating the future of geoengineering, the balance between innovation and regulation, ambition and responsibility, becomes paramount. As the world grapples with the escalating threat of climate change, the pursuit of geoengineering technologies invites us to reconsider our relationship with the planet and the legacy we wish to leave for future generations.

Chinese scientists have created a cheap and super-efficient sea water desalination solution that runs on solar energy.

The desalination system employs a Titanium-containing Layer that absorbs solar energy. The solar absorber consists of a unique paper on which they deposit the Titanium-containing layer which uses foam to float on the sea.

The Titanium layer heats rapidly when exposed to sunlight. It is this heat that vaporizes water. Sealing the unit within a transparent container with a slopy roof made of quartz allows the vapor to condense and the fresh water is collected.

Lead author Chao Chang explains that TiNO is already proven to be effective: “In the solar energy field, TiNO is a common commercial solar-absorbing coating, widely used in solar hot water systems and in photovoltaic units.  It has a high solar absorption rate and a low thermal emittance and can effectively convert solar energy into thermal energy.”

Together, the scientists came up with an innovative way to deposit the TiNO using the magnetron sputtering technique.

The team worked with airlaid paper – a porous paper that supplies the contraption with seawater. It functions like a wicker.

They assembled three parts to create the evaporation unit: the airlaid paper at the very bottom, a thermal insulator, and the TiNO paper at the very top. Airlaid paper is a component of disposable diapers and is built from wood fibres.

The insulation is made using polyethylene foam and contains many pores filled with air that give the unit the buoyancy it needs to float on seawater. This keeps heat loss at a minimum.

“The porous airlaid paper used as the substrate for the TiNO solar absorber can be reused and recycled more than 30 times,” explained Chang.

The researchers wanted to minimize any negative impact of salt precipitation on the device’s efficiency. But they observed that there was no layer of salt on the TiNO surface even after a long while.

This might mean that the paper wicks are porous enough to keep salt from depositing on the TiNO, and that all the salt in the seawater goes back to the main reservoir of water.

Normal seawater is highly saline, at 75,000mg per liter. This is vastly different from normal drinking water whose salinity is only 200mg per liter.  After going through the desalination unit, seawater goes all the way down to 2mg per liter of salt.

The Chinese team of researchers puts together a winning combination of affordability, high efficiency, and hygiene to create desalination that could help make fresh water available to people who face scarcity of water.

A Florida-based team of scientists suggested harnessing geothermal energy to desalinate water without using carbon fuels.

Researchers have created a new way to check soil moisture with a normal digital camera and a synthetic neural network.

The United Nations predicts that by 2050 some parts of the world will not have the fresh water they need to sustain agriculture. This means that we urgently need to adopt more efficient methods of soil irrigation to alleviate the coming crisis.

According to the researchers from the University of South Australia, the techniques currently in use for detecting soil moisture are contributing to the problem.

The sensors they bury in the soil are affected by salts and this calls for specially designed hardware to facilitate the connections.

At the same time, the thermal imaging cameras necessary for the operations cost too much and are sensitive to too much clouds, sunlight, and fog.

“The system we trialed is simple, robust and affordable, making it promising technology to support precision agriculture,” explained researcher Dr Ali Al-Naji referring to his newly innovated solution based on machine learning. “It is based on a standard video camera which analyses the differences in soil color to determine moisture content. We tested it at different distances, times and illumination levels, and the system was very accurate.”

They connect the camera to an artificial neural network that is already trained to identify a range of moisture levels under a variety of sky conditions.

They can train the monitoring system on the network to precisely identify soil conditions regardless of the location. This makes it a customizable solution that each user can adapt to their climatic conditions and make it as accurate as possible.

“Once the network has been trained it should be possible to achieve controlled irrigation by maintaining the appearance of the soil at the desired state,” Professor Javaan Chahl added. “Now that we know the monitoring method is accurate, we are planning to design a cost-effective smart-irrigation system based on our algorithm using a microcontroller, USB camera and water pump that can work with different types of soils.

“This system holds promise as a tool for improved irrigation technologies in agriculture in terms of cost, availability and accuracy under changing climatic conditions.”